 |
 |
 |
|
| Rebuild your Proto SLG with this complete parts kit. |
|
|
|
|
|
 |
|
 |
|
Features
- Bleed button o-ring (20)
- Hyper3 body-inside o-ring (10)
- Hyper3 top cap o-ring (10)
- Bolt plunger o-ring (10)
- Hyper3 body swivel o-ring (20)
- Bolt tip, plunger o-ring (20)
- Hyper3 piston top cap o-ring (10)
- Bolt front bumper o-ring (20)
- Outer bolt o-ring (20)
- Back cap o-ring (20)
- 4-40 x 1/4 Trigger adjustment screw (10)
- 4-40 x 3/32 Trigger adjustment screw (10)
- 8-32 x 5/16 Solenoid lock set screw (10)
- 3 x 15 mm Sear pin (10)
- M2 x 10mm Microswitch, board screw (20)
- M2 x 5mm Board mounting screw (20)
- Trigger pin (20)
- Trigger spring block (2)
- Button (5)
- Sear spring (10)
- 4-40 x 1/8 BTN head eye plate screw (20)
- 8-32 x 3/8 BTN head grip frame mounting screw (10)
- 8-32 x 5/16 BTN head grip panel screws (10)
- Bolt back bumper o-ring (10)
- Hyper3 reg seat (5)
- Proto logo (2)
- Ball detent (20)
- Eye plate set (2)
- Trigger spring (10)
- Ring (2)
- Sear (2)
- Battery connecter (2)
- Micro switch harness (2)
- Eye wire harness (2)
- Circuit board (1)
- SLG Solenoid (1)
- Straight macro fitting (2)
- 90 Degree macro fitting (2)
|
|
|
 |
|
 |
|
|
|
