 |
 |
 |
 |
|
 |
|
Features
- LED Board - 3 tru-colour LED indicators simplify the programming process.
- Soft Grips - Follows the same design as the Geo and Ego grips. Comfortable, slim, grippy and soft.
- Programmable Firing Modes - as standard the Etek3 has the capability to be set to cover every current tourney regulation.
- On/Off Purge System(OOPS) - Uses the sames OOPS as the Ego10. It dumps air from the marker when it's turned off.
- Break Beam Sensor System - Ensures that the marker is preventing chopped balls in the breech.
- Fully Adjustable Trigger - The trigger rides in a self-lubricating trigger holder that clips neatly into the frame.
- 14 inch 2-Piece Barrel - Honed barrel with the distinct Eclipse Reverse Threading using the same interface as the Shaft2, Shaft3 and SL barrels. 0.693" rear bore is standard.
- S3 Inline Regulator - Taken directly from the Ego10, the S3 regulator features a self-purging device to ensure that the valve chamber is left empty once the tank has been removed.
- New Direct Mounted Solenoid - Mounts directly to the marker body, directly adjacent to the rammer.
- Cure Bolt - carried over from the Ego range, the Etek3 now has a Cure Bolt as standard, as well as a body contoured cut at the rear so the bolt blends seemlessly into the marker.
- Zick Kit - The Zick kit that became famous in the SL74 and carried through all Ego08/09 production, can be found standard in the Etek3.
- New Smaller Rammer Housing - this makes the whole rear bottom tube smaller and allows the gun to be more compact.
- Deftek Offset Feed - the feed is offset to one side by a small amount
- One-Piece Body (No FRM) - Like the Ego7 onward, the FRM of the Etek3 is integrated into the body for reliability and robustness.
- Adjustable LPR - With the same LPR found on the SL8r Ego, the Etek3 offers precise control of LPR pressure.
- Emortal LCD Cicuit Board Upgradeability
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
